American Pole & TimberGet a quote

    November 19, 2026

    Wood Porch Columns: Sizes, Species and Treatment

    Beach house porch with round wood columns holding up the roof

    Choosing wood porch columns comes down to 4 things: size, shape, species and treatment. American Pole & Timber (APT) supplies made-to-order solid wood columns in pine, cedar, Douglas fir and oak, 6 to 24 inches in diameter and up to 36 feet long depending on the species, plus no-taper Gun Barrel Pilings® for a uniform round look.

    Key Takeaways

    • Two size ranges. Solid columns run 6 to 24 inches by up to 36 feet; Gun Barrel Pilings® run 5 to 20 inches by up to 52 feet, with no taper.
    • The load sets the minimum. Your engineer or local code sizes the column and its connections.
    • Four main species. Pine, cedar, Douglas fir and oak, with others on request.
    • Protect the base. Ground-contact treatment, a dry base and Polyshield® coating guard the spot where most posts rot.

    What sizes do wood porch columns come in?

    APT’s solid wood columns come 6 to 24 inches in diameter and up to 36 feet long, depending on the species, and other sizes can be made on request. Gun Barrel Pilings® come 5 to 20 inches in diameter and up to 52 feet long.

    CompareSolid wood columnsGun Barrel Pilings®
    Diameter6 to 24 inches, by species5 to 20 inches, custom to the half-inch
    LengthUp to 36 feetUp to 52 feet
    ShapeNatural solid logs selected for straightnessLogs machined to one diameter, no taper

    How to pick a size

    • Load: your engineer or local building code sets the minimum size for the roof load, the column height and the wind.
    • Length: measure from the finished floor or base to the underside of the beam, then trim on site or have APT cut the columns to length.
    Four solid round pine columns on a forklift
    Solid pine columns.

    Round or square porch columns?

    Both work, but the shape affects how easily the columns line up.

    • Natural round poles taper, typically about 1 inch in diameter per 10 feet of length, so neighboring columns can look mismatched.
    • Gun Barrel Pilings® are machined to one diameter end to end, so columns match, beams and railings line up, and nothing needs turning to sit square.
    • Square timbers must be turned so a flat face meets the beam. APT’s cedar timbers commonly come up to 12x12 inches and 24 feet long, and its treated timbers come in almost any dimension.

    Gun Barrel Pilings® are also stronger than square pilings of comparable size; see Gun Barrel Pilings® aesthetics for more on the look.

    Should porch columns be solid wood, hollow or wrapped?

    Choose solid wood when you want one piece that is both the structure and the finish, like the wooden pillars of ancient architecture. Hollow and wrapped columns are built around an empty core or a hidden post.

    • Solid wood shows real grain and can be cut, drilled, carved, painted or stained. Like any large timber, it can develop surface cracks called checks as it dries; that’s normal.
    • Hollow columns are built from boards or molded materials. Some carry loads and some are decorative, so check the maker’s load rating.
    • Wraps are decorative sleeves; the post inside does the work and still needs protection from moisture.

    Which wood is best for exterior porch columns?

    For a painted or stained exterior porch, pressure-treated pine is the practical choice; cedar suits a natural look without treatment. Availability depends on the size you need and, for Gun Barrel Pilings®, your location.

    SpeciesOffered asGood to know
    PineSolid; Gun Barrel Pilings® in southern yellow pine or white pineSouthern pine accepts treatment readily; pine is typically cheaper than Douglas fir because it grows in the Southeast
    CedarSolid; Gun Barrel Pilings® in western red or white cedarNaturally resistant to insects; treatment isn’t necessary, and an occasional stain or sealant protects it
    Douglas firSolidClose to pine in structural strength; ships from the Pacific Northwest
    OakSolid; Gun Barrel Pilings®A hardwood; ask about sizes
    Ranch house porch held up by round wood columns
    Gun Barrel Pilings® as porch columns.

    How should exterior porch columns be treated and protected?

    Outdoors, pressure treat pine and fir columns and protect the base. APT pressure treats exterior solid columns to the level the job needs, from ground contact for regular exterior use to saltwater for marine work.

    Pressure treatment and kiln drying

    A porch column isn’t buried, but it carries the roof and its base sits where water collects, so ground-contact treatment is the safe choice. APT’s guide to pressure-treated lumber for decks puts posts in UC4A (ground contact). APT offers kiln drying before treatment on its treated posts, which lets the preservative penetrate fully and significantly increases their life; ask about it for columns.

    Polyshield® polymer coating

    For the longest life, have APT coat the columns with Polyshield® polymer wood coating before delivery. It bonds to the wood and protects against termites, rot and UV rays. Coat the whole column or just the base; standard colors are brown and forest green, with custom colors on request.

    Finishes

    Gun Barrel Pilings® ship unfinished unless you specify hand hewn (the antique, planed-by-hand look), distressed, sanded, or stained or painted in your choice of brand and color. They can be kiln-dried on request to arrive ready for stain. Let treated wood dry before you paint or stain it.

    Round wood columns on raised brick bases under a porch roof
    Raised bases keep column ends dry.

    How do you install wood porch columns so they last?

    Set each column on a base that keeps its end grain dry, fasten it top and bottom with hardware rated for treated wood, and follow the sizes and connections your engineer or local code sets.

    • Keep the bottom dry. Rot at the ground line is the most common way posts fail; a raised base or standoff post base lets end grain drain and dry.
    • Treat what you cut. Brush a field preservative such as copper naphthenate on cuts and holes made on site (AWPA Standard M4), or have APT pre-cut and pre-drill.
    • Use the right hardware: typically hot-dip galvanized or stainless steel. APT supplies hardware and fasteners, including post base anchors.
    • Tie the top down to the beam against wind uplift, as your engineer or local code specifies.
    • Plan the lift. Solid columns are heavy; line up help or equipment to set and plumb them.
    • Order them ready to set. APT can pre-drill, make custom cuts or cut one side flat before shipping, and can help if you need to run conduit or wiring inside a column, say for porch lights.

    How much do wood porch columns cost?

    APT quotes porch columns per project, because the price depends on the species, diameter, length, treatment, coating, finish, custom work and delivery. Gun Barrel Pilings® cost much less than traditional architectural columns and less than square timbers in most sizes.

    To talk through your porch, call a Project Consultant at 1 (800) 716-0636, or compare solid wood columns and Gun Barrel Pilings®.

    Wood porch columns FAQ

    What size wood columns do I need for a porch?

    Size the columns to the load first: your engineer or local building code sets the minimum. Within that, choose by height and looks. APT’s solid wood columns run 6 to 24 inches across and up to 36 feet long; Gun Barrel Pilings® run 5 to 20 inches, custom to the half-inch, and up to 52 feet.

    Do porch columns need to be pressure treated?

    Pine and fir columns used outdoors should be. APT treats exterior solid columns from ground contact for regular exterior use up to saltwater for marine work. Cedar is naturally resistant to insects and doesn’t need treatment, though an occasional stain or sealant helps, and APT can polymer-coat cedar posts where they meet the ground. Interior columns can be left untreated.

    What is the best wood for exterior porch pillars?

    For a painted or stained porch, pressure-treated southern yellow pine is the practical choice: it accepts treatment readily and typically costs less than Douglas fir. Cedar suits a natural look without treatment. APT also offers Douglas fir and oak columns, and Gun Barrel Pilings® in white pine and cedar.

    Are solid wood columns better than hollow porch columns?

    They do different jobs. A solid column is one piece of wood that carries the load and is the finish. Hollow columns and wraps are built around an empty core or a hidden post; some are load-rated and some are decorative. Solid wood can develop surface checks as it dries, which is normal.

    How do I keep wooden porch posts from rotting at the bottom?

    Keep the end grain off wet surfaces with a raised or standoff base, use ground-contact treatment, and treat any cuts made on site. For extra protection, have APT zone-coat the base with Polyshield® polymer wood coating, which protects against rot and termites.

    Can you paint or stain pressure-treated porch columns?

    Yes. Let the treated wood dry first, then follow the paint or stain maker’s directions. APT can also kiln-dry Gun Barrel Pilings® so they arrive ready for stain, or deliver them sanded, stained or painted in your choice of brand and color.

    Do round wood porch columns taper?

    Natural round poles do, typically about 1 inch in diameter per 10 feet of length. Gun Barrel Pilings® don’t: each is machined to the same diameter end to end, so the columns match, beams and railings line up, and you can pre-cut them from your parts list instead of fitting each one.

    Does APT ship wood porch columns nationwide?

    Yes. APT’s solid wood columns are available nationwide, and APT will export almost anywhere, for orders from a few columns to multiple truckloads. Each column is made to order: call a Project Consultant at 1 (800) 716-0636 with the species, size and treatment you need.

    Get a quote on solid wood porch columns

    Use the form below or call 1 (800) 716-0636. Tell us the number of columns, the diameter and length, the species, treated or untreated, any finish or custom cuts, and your delivery ZIP code, and an APT Project Consultant will reply with a quote.

    Share this article

    Massive Selection. Custom Production. We Get Your Project Moving Fast.

    Ready to start your pole & timber project?