SnapJacket Piling Repair Jacket for Wood Pilings
Easy to Install
- Simply cut the jacket to length, blow out the sand and slip it around the pile without disturbing any of the deck above.
- Slide the locking device down the middle and your form is ready to fill.
- Lastly, pour the void with concrete, the concrete will then flow into the voids creating a new solid piling.
Once the jacket is filled with cement, all marine boring organisms that are eating away the inside are instantly killed. From then on the pilings will be protected from any future environmental and organism damage.
By opening up and easily locking back together, using the SnapJacket does not require you to disassemble any portion of the structure built on top of the piles. With proper engineering the SnapJacket can even restore a completely broken & rotted pilings to beyond its original strength.
25 Year Warranty
Due to the fact that PVC does not wear down in the water, we offer a 25-year warranty on the SnapJacket. The concrete will remain untouched by the elements, effectively fossilizing everything inside of the jacket. Theoretically, this rotted pilings repair jacket should last a lifetime and then some.
Available Up to 16 Inches
Available in 10, 12, 14, and 16-inch diameters, the SnapJacket will fit around most marine piles. It is recommend you choose a piling repair jacket that has at least an inch and a half of annular space all the way around the pile.
SnapJacket Installations Photo Gallery
SnapJacket Installation Guide